Sign In
We supply all necessary fittings required for lubrication systems and hydraulic applications. Fittings are available in a range of geometry, sizes, material and pressure rating depending on application.
Common Applications
Lubrication and Hydraulics
Fittings are broadly classified in following series :
| Manifolds
Manifolds are required for mounting metering cartridges. Manifolds are zinc plated steel blocks with two inline ports,normally suitable for 6 mm OD tubes and no. of side outlets with thread size M8x1 or M10x1.
Type of manifolds is selected depending upon model and no. of metering cartridges to be fitted. A manifold shall cater all the lubrication points lying in the same vicinity.
|
Technical Specifications |
| Straight Male Stud Coupling
We supply all the sizes of straight male stud couplings required for lubrication. Available in Brass, SS-304 and SS-316 also. |
Technical Specifications |
| Male Stud Elbow
We supply all the sizes of male stud elbows required for lubrication. Available in Brass, SS-304 and SS-316 also. |
Technical Specifications |
| Banjo
We supply all the sizes of banjos required for lubrication. Banjos are typically used where space is a constraint and elbow cannot be fitted. |
Technical Specifications |
| Connector Blocks
Connector Blocks are used where 2 lengths of tubes need to connected. Our connector blocks can be screwed on the base surface giving them an edge over standard parallel straight couplings. |
Technical Specifications |
| Elbow Blocks
Elbow Blocks are used where 2 lengths of tubes need to connected at right angle. Our connector blocks can be screwed on the base surface giving them an edge over standard elbow. |
Technical Specifications |
| Cross Block
Cross Blocks are used where a pipeline needs to be distributed or several pipelines need to be joined into one. |
Technical Specifications |
| Tee Block
Tee Blocks are used where a pipeline needs to be distributed into two or two pipelines need to be joined into one. |
Technical Specifications |